丁醛是重要的有機化工產品,主要用于制造樹脂、增塑剎、硫化促進劑等。丁醛中主要雜質有水、巴豆醛、丁酸及微量的乙醛、乙醇、丙酮等。丁醛含量為95％以上,用化學分析難度較大,準確度也差。

浩瀚色譜（山東）應用技術開發有限公司采用氣相色譜儀(FID檢測器),聚乙二醇毛細管柱，對雜質進行色譜定量后,用差減法計算丁醛含量,獲得了較為滿意的結果,最大相對偏差為5.26％。

本標準規定了工業用正丁醛的要求、試驗方法、檢驗規則、標志、包裝、運輸、貯存及安全。
本標準適用于由丙烯羰基合成法制得的工業用正丁醛

名稱：毛細管柱
型號：PEG-20M
規格：30m*0.32mm*0.5um
溫度：240°C
編號：20230211001
應用：HG/T 4964-2016 工業正丁醛 

Butyraldehyde is an important organic chemical product mainly used in the manufacturing of resins, plasticizers, vulcanization accelerators, etc. The main impurities in butyraldehyde include water, crotonaldehyde, butyric acid, and trace amounts of acetaldehyde, ethanol, acetone, etc. The content of butyraldehyde is over 95%, which makes chemical analysis difficult and has poor accuracy.

Haohan Chromatography (Shandong) Application Technology Development Co., Ltd. used a gas chromatograph (FID detector) and a polyethylene glycol capillary column to quantitatively analyze impurities. The butanal content was calculated using the subtraction method, and satisfactory results were obtained with a maximum relative deviation of 5.26%.

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage, and safety of n-butyraldehyde for industrial use.

This standard is applicable to industrial n-butanal obtained by propylene carbonyl synthesis method

Name: Capillary Column

Model: PEG-20M

Specification: 30m * 0.32mm * 0.5um

Temperature: 240 ° C

No.: 20230211001

Application: HG/T 4964-2016 Industrial n-butanal

滕州市浩瀚色譜儀器技術服務有限公司
電話：0632-5667636
傳真：0632-5667636
手機：15562228838,13963221227
地址：山東滕州市平行路（商務部和技術部）
郵箱：wangxiaoying9@126.com
QQ:1404939462
聯系人：王經理
網址：lirwjob.com.cn